Lead-Free Brass P X P Mechanical "V" Profile Press Union
The Fada Press System Eco Brass male union features an inboard EPDM O-ring. Simply applying pressure from a pressing tool tightens the O-ring onto the tube, ensuring a clean, watertight seal in seconds, with no flame, solder or flux. The male union has a press connection and male NPT thread. The fitting provides a method for adapting a press connection to a threaded connection.
In addiction to its inherent qualities of beauty, durability and low maintenance, copper's reusability makes it an ideal application in sustainable projects.
The small diameter fittings 1/2"-2" are made from naturally lead free brass. EPDM O-ring are pre-installed and lubricated with ANSI/NSF 61 listed silicone oil.
Press Series Products
* Including couplings, elbows, tees, adapters
* Extensive offering of reducing tees
* Leak detection feature identifies un-crimped connections
* Compatible with most common pressing tools and jaws in the market
* EPDM seals can be factory-installed &lubricated or by customers.
* Packaged in common industry quantities.
Accessory
Leak detect EPDM O-ring
Applications
Including hot & cold water plumbing, hydronic heating (incl. ethylene, propylene and butylene glycol mixes), compress air (oil-free), low pressure steam, vacuum, grey water and others.
Installation Instruction
1. Deburring tube ID and OD with file.
2. Check seal for correct fit. Do not use oils or lubricants.
3. Mark proper insertion depth for well sealed.
4. While turning slightly, slide press fitting onto tubing to the marked depth.The end of tubing must contact stop.
5. Open the jaw and place at right angles on the fitting.
6. Start pressing process and hold the trigger until the jaw has engaged the fittings.
Pressing tool and jaws
DN15-50 Fittings Space Requirements
| Nominal Size |
Acutal OD
mm |
A
mm |
L
mm |
e Insertion Depth
mm |
| DN15 |
12.70 |
10 |
42.6 |
16.3 |
| DN20 |
19.05 |
10 |
51.8 |
20.9 |
| DN25 |
24.40 |
10 |
60.4 |
25.2 |
| DN32 |
31.75 |
10 |
68.4 |
29.2 |
| DN40 |
38.10 |
20 |
88.6 |
34.3 |
| DN50 |
50.80 |
20 |
102.4 |
41.2 |
Bada Valve manufacturer:
Brass Fittings & Valves
Bronze Fittings & Valves
Brass Faucet
Brass Floor Drain
Taizhou Bada Valve Co.,Ltd is considered as one of the leading supplier of brass fittings & valves and faucets in China. Since 1980's, we insist to supply superior products and excellent service, which distinguish us from other competitors.
With the basis of rigid quality control, Bada Valve sets up the mass production system to manufacture brass fittings and valves. It is able to supply most sizes of brass fittings in various standards of industrial applications, such as water supply, gas, sanitation, cooling/heating.
As well as the China market, Bada Valve currently supplies it's quality products to the USA, UK, France, Italy etc with the required certification for each country. Bada Valve continues to develop its business partnerships throughout Asia, Europe and South America.
Location
Headquarters
Fengjiang, Luqiao District, Taizhou City Zhejiang Province, China Zip Code 318054
Factory
No. 7, industrial road, Luohe Industrial Park, Guixi, Yingtan Jiangxi Province, China Zip Code 335400
Frequently Asked Questions
Q: What is NSF/ANSI 372, Drinking Water System Components?
A: The Standard establishes procedures for the determination of lead content based on the wetted surface area of products. This standard applies to any drinking water system component that conveys or dispenses water for human consumption through drinking or cooking. The NSF/ANSI 372 standard is consistent with requirements of the Reduction of Lead in Drinking Water Act.
Q: What does Lead free mean?
A: The Federal Safe Drinking Water Act, redefining "lead-free" as a maximum weighted lead content of 0.25% on the wetted surface of plumbing products. Before that 2011 amendment, the legal limit was 8%. In other words, leaded pipes, fittings and valves can only be used in process that don't involve contact with food, drink or any other form of bodily intake.
Audited Supplier 
The Fada Press System Eco Brass male union features an inboard EPDM O-ring. Simply applying pressure from a pressing tool tightens the O-ring onto the tube, ensuring a clean, watertight seal in seconds, with no flame, solder or flux. The male union has a press connection and male NPT thread. The fitting provides a method for adapting a press connection to a threaded connection.
){kind=link}
){kind=link}